Showing posts with label L AND T Infotech. Show all posts
Showing posts with label L AND T Infotech. Show all posts

Saturday, June 7, 2008

L&T Infotech pattern

L&T Infotech pattern

L&T
Pattern:(Multiple choice pattern)


1. 2 tests(analytical and technical)
analytical 1hr(50 qns) (COMMON FOR ALL BRANCHES)
technical 1hr(50 qns) (DIFFERENT FOR EACH
STREAM(civil,ece,cse,mech,Ice)

( we have to write both paper.They will short list
based on cut off from both papers)

2.GD(not for elimination process)

3. Interview.

ANALYTICAL:


( I Don't remember questions)

1) ( 1 - 13) -> English
2) (14 - 26) -> Quans
3) again english
4) 2 analytical reasoning with sub divisions
5) 3 data interpretation qns. with sub divisions

TECHNICAL :( CSE pattern)


20 qns from ASP and VB script

2 hardware related qns.
4 rdbms qns.
1 N/w
3 OS
2 software engineering qns
3 HTML qns
2 style sheet qns
1 XML
Thats all i remember

PAPER 10

the pattern is like:

1) branch related ques. 50(30 min)

2) engg. aptitude test 60(40 min.)

3) non verbal ques. 36 (40 min)

mech. ques which i can recall is ...may not be as per the language stated there in paper but it would really help there a lot.....

mech.

1.what is the equivalent spring constant of two srings with k1 & k2 as sring constant connected in series? ans. k1.k2/(k1+k2)

2.by which moulding we produce thermosetting plastics?

3.when air is dirty what will be the injectility of the fuel .................more ?

4.carbon deposits increase the comp. ratio.

5.carbon increases the hardness.


6.hot fluid passes thro the cylinder. by using two insulating material(k,2k)in which sequence may be more effective.......? ( firstk, then 2k matl.)



7.wings of the plane can be made by stretching.

8.what will be the metal removal ratio if the balancings r done at 3000&1500 rpm..

( cent. forces to be considered......ans 1:4)


9.what is cylinder ratio? ans. arrangement of cylinders in which the centre line of crankshaft journal is per.to the plane containing the centrelines of the engine cylinders.

10. In diesel cycle the compression ratio incereases more to expension ratio.

11. In the shm of the ball inside a earth hole passing through the center ,velocity maximum at the center.

12.viscosity of liquid increases with decrese in temprerature.

13. Piezometer measures static pressure..

14. Which iron is used for body construction of machines, gray or white iron ?( not sure)

15.what is core print ?

16. pig iron is manufacture in --------blast furness

17. what is the effect of increase arc lenght in building

18. m 62 indicates ------ 6mm outer diameter & 2 mm pitch

19. what raputre failure.


20 . 6 cylinders in a row , n0. of crancks = 1

21. If in a steam power plant vaccum in condensor reduces what is the effect

22. pressure in industrial pnumatic lines -------5 to 10 bar

23. effect of low temp. ( -20 degree ) on carbon steel .

24.method of hardening of machine guidesways

25. method of joining plastic by welding

26. safe method of loading on a cantileaver

a) UDL b) center point load c) triangular load having zero at center

27. BMD for UDL in cantilever

Ans. parabolic

28. Beams of uniform strenght can be made by

a) varying width b) varying depth c) both d) none

29. which of these not fusion welding process

Ans: spot welding

30. function of stroboscope is

Ans: speed measurement of spur gear


31.if diameter of pully is double how will the design of key way change

32.gray cast iron used for machine parts


33. use of worm gear

34.what will be the diameter of punched hole in punching opereation

a) same as punch b) punch dia + thichkness of sheet

35. this is figure porblem

described as :

there is right anguler wadge with pully at vertex connecting

two equal masses by string one on the sloping side and other

on the vertical side

Questin is what will happen to them

Ans: mass will fall down
1. Technical 52 quest. Simple, brush up ur technicals

2. Mechanical aptitude simple quest on physics, applied mech.

Need not to study. Do not bother abt it.

3. Non verbal reasoning on figures.

I am sending few ques.

Electrical.....

1. Transmision losses in india> (ans:20%)

2. Generating capacity of india> ( ans:1,00,000)

3. Motor used in traction> ( ans: dc series motor)

4. Numericals of changing delta to star & vice versa. Resistance
To be found.

5. Acsr conductors are used for------ reducing corona

Mechanical:

section one

These are the questions which are asked in technical section .
In total there were 46 questions and the given was 30 minutes.
Somebody was saying that they have given the last year paper.
After the questions i am giving the options (the order of questions and as wel as options
May not be the same)

1 in diesel engine the comp. Ratio is ______ then expansion ratio(more,equal,less,...)

2 carbon help in the improving __ of steel(ductility,malliability,hardness,machinability)

3 max hardness in steel is due to
A carbon b sulpher & phosphorus c alloy metal d none

4 ci is used in heavy m/c beds due to(low cost,has high damping coefficient,its easier)

5 spring in series,give relation for stiffness(ans:k1*k2/(k1+k2)

6 two material of conductivity k & 2k are used in laggging the pipe,find the position of

material w r to each other for minimum conduction[inner]

7 cronining in pully is done to

8 the shape of the b.m. Diagram of cantilever carrying u d l is rectangular hyperbola

9 hammer blow in pipe is due to

10 for uniform st of beam.

11 which beam will be uniformly loaded

A] a simply suported beam carrying point load at center

B]--- --- u d l over whole length

C]--- ---centraly half of length

D] a cantilever beam carying u d l

12 a petrol engine having carbon deposition over the piston will effect on

13 fuel air ratio in engine having dirty oil filter as compared in carburator with clean oil
filter is (ans more)

14 areoplane wing are formed by

A]casting

B]forgiing

C]wire edm

D]stretch forming

15 for butt welding of dissimilar metal of unequal thickness,which parameteer should have
a]time of cureent

b]pressure and time of current etc

16 plastic are welded by

a] e beam welding

b]co2 welding
c]gas weldinng

d]ultrasonic weldind

17 which of the followwinng is not fusion welding
oxy-acetylene,co2 wel,submergedd welding

18 effect of shear angle in punching

19 dia. Of the hole formed in shearing/blanking is given by

20 effect of increasing the length of arc in arc welding

21 if the condenser vaccum is lost suddenly,the steam turbine is hipped because

22 worm gear & worm wheel are used in(high reduction ratio,low reduction ratio...)

23 if the dia. Of pully is increased ,width being kept constant,what should be done to the key
24] thermosetting plastics are moulded by which moulding(investment moulding)

25]what is rupture stress

26]what is the range of pressure in industrial pneumatic pipe line

27]two plates are joined by riveting(lap) which and how many rivets should be used

a]4 rivets 10 mm dia

b]1 rivets 12 mm dia.

c]2 rivets 8 mm dia.

Ans c.(to avoid rotary motion)

28]damper is

A]energy producing device.

B]energy absorbing device.

C]energy dissipating device.

D]vibration reducing device.

Ans b.

29]there are six cylinder in line rotary engine.how many cranks does this engine has.

section 2

this section contains very logical questions based on gears,pulley and liquid pressure.

Total 60 questions time allotted is 40 min this section contains many figures and questions

Are asked based on those figures.for example

1]7 or 8 gears or wheels are connected either directly or through belt drives.the direction
of motion of one gear is specified.and asked which all other gear will rotate in the same direction.

It is not possible for to give figures for these questions.this whole section contains
at least 10 questions of this type.

2]10 questions are based on weight lifting arrangements like lever,cylider wrapped with a rope
Operated through hand crank,3-4 pulley arrangements,the mechanism used to lift the engines of

cars.you have to find out in which mechanism least strengthis needed.

3]8-10 questions were based on liquid pressure.4 jars are full of water up to the same height.
These jars are provided with tubing of different length and shape and asked in which figure
We will have highest pressure at the end of the tube.

4]one question was : in a centrifuge water oil and merquery is poured and rotated.then which
Liquid will be at the centerand which one will be at the periferi.

5]one question was :a man is standing on a stand generally used by electrician ( /\ type) at
different positions and different height and drilling a hole in the wall.in which case he is

likely to fall.

6]there are 5 shapes for a dam

1 >
2 <
3 )
4 (
5 |
6
Which will be the safest.

7]two or three questions were asked on balancing of masses.like one weight is hung on one side
of a lever then what will be the weight of balancing one.

Section 3

This section is of figurative apptitude.
In a 3 by 3 matrix only the last box is empty.
Figures of each row has some relation among them.so you have to find the missing figure
From 7 options.

This sections cotntains 36 such questions . It won take more than 15 minutes to solve upto 20.
But then it becomes somewhat tougher.the total time alotted is 40 min.

There is a book called "how to face interviews".this book contains the same type of questions.

PAPER 7

The second part is of 30 minutes and covers various (IMHO irrelevant)
topics. Some more questions. Remember all are multiple choice questions
with either 4 or 5 options so you have at least a 20-25% chance of
being right even if you are clueless. No negative marking.

1. what is an inode in unix?
2. small program in pascal to add a node to a linked list. (You have to
tell what the program does)
3. C strcmp program (You have to tell what the program does)
4. set of dos commands testing basic familiarity with dir, ren *.t?t,
cd etc.
5. what is the order of binary search?
6. what is the order of strassens matrix multiplication?
7. you have to maintain the sorted order of integers and insert
integers . which data structure would you use? (tree, list, queue,
array?)
8. There are two lists of integers to be merged. Which method would you
not use?
9. In an online database system when is data written to disk? (on
pressing enter, when commit or update is encountered, at end of data,
all of the above) (was clueless! )
10. Small prolog function which prints 2345true. You need to tell
output.
11. Convert this binary into octal. 010 100 101
12. Lisp program given. what does it do? (GCD, LCM, Multiplies mxn?)
13. What is paging?
14. what is segmentation?
15. 2/3 questions on equivalence class, associative and commutative
properties.
16. question on poset.
17. one figure given, give regular expression for it

PAPER 6

*the pattern is like: 1) branch related ques. 50(30 min) 2) engg. aptitude test 60(40 min.) 3) non verbal ques. 36 (40 min) mech. ques which i can recall is ...may not be as per the language stated there inpaper but it would really help there a lot..... mech.

1.what is the equivalent spring constant of two
srings with k1 & k2 as sring constant connected in series?
ans. k1.k2/(k1+k2)
2.by which moulding we produce thermosetting plastics?
3.when air is dirty what will be the injectility of the
fuel .................more ?
4.carbon deposits increase the comp. ratio.
5.carbon increases the hardness.
6.hot fluid passes thro the cylinder. by using two insulating
material(k,2k)in
which sequence may be more effective.......? ( firstk, then 2k
matl.)
7.wings of the plane can be made by stretching.
8.what will be the metal removal ratio if the balancings r done
at
3000&1500 rpm.. ( cent. forces to be considered......ans 1:4)
9.what is cylinder ratio? ans. arrangement of cylinders in which
the centre line of crankshaft journal is per.to the plane
containing
the centrelines of the engine cylinders.
10. In diesel cycle the compression ratio incereases more to
expension
ratio. 11. In the shm of the ball inside a earth hole passing
through
the
center ,velocity maximum at the center.
12.viscosity of liquid increases with decrese in temprerature.
13. Piezometer measures static pressure..
14. Which iron is used for body construction of machines, gray
or
white iron ?( not sure)
15.what is core print ?
16. pig iron is manufacture in --------blast furness
17.what is the effect of increase arc lenght in building
18. m 62 indicates ------ 6mm outer diameter & 2 mm pitch
19. what raputre failure.
20 . 6 cylinders in a row , n0. of crancks = 1
21. If in a steam power plant vaccum in condensor reduces what is
the
effect
22. pressure in industrial pnumatic lines -------5 to 10 bar
23. effect of low temp. ( -20 degree ) on carbon steel .
24.method of hardening of machine guidesways
25. method of joining plastic by welding
26. safe method of loading on a cantileaver a) UDL b) center
point load c) triangular load having zero at center
27. BMD for UDL in cantilever Ans. parabolic
28.Beams of uniform strenght can be made by a) varying width
b) varying depth c) both d) none
29. which of these not fusion welding process Ans: spot welding
30. function of stroboscope is Ans: speed measurement of spur
gear
31.if diameter of pully is double how will the designof key way
change
32.gray cast iron used for machine parts
33. use of worm gear 34.what will be the diameter of punched hole
in
punching opereation a)same as punch b) punch dia + thichkness of
sheet
35. this is figure porblem described as : there is right anguler
wadge
with pully at vertex connecting two equal masses by string one on
the
sloping side and other on the vertical side Questin is what will
happen to them Ans: mass will fall down

----------------------------
************************* Electical Paper
1. thermal relay
is used to --------------- to avoid heavy load 2.
traction devices voltage used is -----------11 kv
3.in
traction device which motor is used ----------AC
series 4. Fuse is not connected in Ans: neutral of
AC
5. Intensity of shock which u will get is directely
porpertional to ------voltage 6. when u touch a
shocket u will not get a shock -----------when
system
is not earthed 7.study hrc fuse 8. study different
faults 9.different category of insulator in some
order------------like ABFH 10.universal motor is a
---------AC series 11. speed of AC series motor is
contorled by a) armature b) field c) both Ans: both

. Technical

. Technical

2. Aptitude ( whole based on related figures not mathematical questions )

Aptitude:

IDENTIFY THE UNKNOWN FIGURE FROM GIVEN RELATED FIGURES>

3 - sets of figures(SHAPES ) ARE GIVEN .EACH SET HAVING THREE FIGURES
LAST SHAPE OF THIRD SET Will be missing and you HAVE TO IDENTIFY it BY CHECKING OTHER COMBINATIONS


A1 A2 A3

B1 B2 B3

C1 C2 X Find X?

Given 8 number of choices.

(some times X is decided by whole combinations ie, A1, A2 ,A3,B1,B2,B3,C1,C2)


Some combinations will be complicated .So be calm and quite when attendung the aptitude test.Care must be taken to utilize
the allocated time perfectly since you have only 30 minutes for 36 questions and you have to deal with some complex figures
( I think in the middle part given combinations were complex ;complex means very complex).
My advise is to be practise well before attending the test.Since Tchnical part is not hard your fate is decided by aptitude
Test only.

Technical:

There are 40 Questions and 4 choises for each
Duration : 30 minutes

NOTE :
I list here some Questions and some choices that i do remember ,as it is.Some times there may be mistakes in Questions and
choices.My intension is to present how the test would be.

1. a( [ B ( [A^ C]]
where '(' and '^' are symbols related to SET and '^' is not exact symbol , it is curved not conical(due to limitation of
key board ), represents"union"

a. has no sense

b.It is associative as well as commutative

2.2's complement of given Binary number

3. Octal Equivalent of a Binary number

4.Given --
Ac + AB + BC =


a. AC
--
b. BC+AC

5. Question related to linked list

Given a program coding in C++ and asked what it is doing.class definition not given

choices were a. Deleting a node
b. Adding a node at head
c. Adding a nde at end

I think it is adding a node at the head of the node.


Note:

You must go through linked list verywell both class definition and program to adding the node ,deleting the node ,
initialising the linked list etc..

6.Some Questions related to data structures like
traversing through
QUEUE
TREE etc.

7.Evaluate given polish prefix expression ( i am not remembering the expression)

8. LIST| Sort | MORE

a. Lists the files after sorting and diplay "more"
b. List or sort the file and ask for any more files
( I do remember only these two choises )


9. Copy QUEUE/SORT TXT.axb QUEUE/AJITH
cd QUEUE/AJITH
ren TXT*.AXB TXT*.ayb
DEL *.ayb
DIR

What are the files listed?
choices

a. only '.' and '..'
b. all files starting TXT
c. No files listed

10. 1 simple question from COBOL